If you experience an electrical emergency, it is important to know what to do in order to ensure your safety and the safety of those around you. This blog post will outline seven steps to take in the event of an electrical emergency.

Turn Off the Power:

The first step you should take if you experience an electrical emergency is to turn off the power. If you can safely reach the electrical panel, turn off the power at the main breaker. If you cannot safely reach the panel, or if you are not sure how to turn off the power, evacuate the area and call an electrician once the power is turned off, do not touch any electrical equipment or wires. If you must touch something electrical, use extreme caution and wear rubber gloves and other protective gear. If a person has been electrocuted, do not touch them. Call 911 immediately. If there is a fire, evacuate the area and call 911.

 Evacuate the Area:

If you cannot safely turn off the power, or if you are not sure how to turn off the power, evacuate the area and call an electrician. Do not return to the area until the power has been turned off by an electrician.

  • If the air conditioner is running and the breaker trips, turn off the air conditioner and do not turn it back on until you have solved the problem.
  • Never go near a downed power line. The line may be energized and you could be electrocuted. Stay clear and call the utility company to report the incident.
  • Never try to remove a tree limb that is touching a power line. Call the utility company to remove the limb.

Call an Electrician:

If you experience an electrical contractors in Montgomery, AL emergency, call an electrician. Do not attempt to repair the problem yourself. Only a trained professional should work on electrical systems. When you are choosing a new electrical contractor, ask them to show you their license and proof of insurance. These are essential to ensure they are legitimate and are covered in case they do something wrong. If they do not have these things, you do not want to hire them.


An electrician should know the difference between a circuit breaker and a fuse. If a fuse is blown, it simply means that the circuit has too much electricity running through it. If you replace a fuse with a breaker, it will allow the circuit to have more electricity run through it.